ABOUT US

LIYINGSHUN

PRODUCT INTRODUCTION

3000 series aluminum coil

‹

›

‹

  • 3000 series aluminum coil
  • 3000 series aluminum coil
  • 3000 series aluminum coil

›

Special specifications can be customized according to customer requirements

产品规格.png

3000 series aluminum coil


Item description:Aluminum coil
Width:600mm-2500mm or customized according to requirements
Thickness:0.2mm-500mm or customized according to requirements
Length:According to the need to customize
Main types:Plate, belt, thin plate, medium plate, thick plate, super thick plate, coil
Brand:"1 series: 1A99, 1A97, 1050, 1050A, 1A50, 1060, 1070, 1350, 1145, 1035, 1100, 1200, 1235, 1A30,2 series: 2A01, 2A02, 2A04, 2A06, 2A11, 2A12, 2A14, 2A16, 2A17, 2A21, 2A25, 2A70, 2A80, 2A90, 2204, 2014, 2214, 2017, 2219, 2024, 21243 series: 3A21, 3003, 3103, 3004, 3005, 31055 series: 5A01, 5A03, 5A05, 5A06, 5B05, 5B06, 5A12, 5A13, 5A30, 5A66, 5005, 5019, 5050, 5251, 5052, 5154, 5454, 5754, 5056, 5456, 5082, 5083, 5182, 5183, In 5086,6 series: 6A12, 6B12, 6A51, 6101, 6005, 6060, 6061, 6063, 6063A, 6181, 6082,7 series: 7003, 7005, 7020, 7022, 7050, 7075, 7475, 7A01, 7A03, 7A04, 7A05, 7A09, 7A10, 7A15, 7A52,8 series: 8A06, 8011, 8090,"
Standard:ATSTM B209, JIS H4000-2006, GB/T3190-2008, GB/T3880-2006, etc
Surface:Bright, polished, hairline, brush, sandblasting, grid, relief, etching, rolling surface finish, no stains, no rough edges, patterns, printing
Properties:Corrosion resistance, heat resistance, high hardness, good ductility
Production process:Hot rolling or cold rolling
Status:O、H12、H14、H16、H18、H112、H113、H19、H111、H22、H24、H26、H211、H32、H36、H38、H131、H151、H241、H261、H341、H361、F、T53、T6、T63、T6351、T651、T73、T7351等
Product application:Industry, transportation, building modeling, automobile, medical machinery, etc


3000 series aluminum coil

3000 series aluminum coil

3XXX series aluminum manganese alloy
Standard: GB/T3190-1996
Features and scope of application:
3XXX series is Al-Mn alloy, which is the most widely used antirust aluminum. The strength of this alloy is not high (slightly higher than that of industrial pure aluminum), and it can not be strengthened by heat treatment. Therefore, cold working method is adopted to improve its mechanical properties: It has high plasticity in the annealing state, good plasticity in the semi-cold hardening, low plasticity in the cold hardening, good corrosion resistance, good weldability, poor machinability. It is mainly used for demanding high plasticity and good weldability. It is used for low load parts working in liquid or gas medium, such as mailbox, gasoline or lubricating oil conduit, various liquid containers and other small load parts made by deep drawing. 3XXX series aluminum plates are used for rivets with good formability, solubility and corrosion resistance. It is used for processing parts and components requiring good formability, high corrosion resistance and good weldability, or for work requiring both these properties and higher strength than 1XXX series alloy, such as kitchenware, food and chemical product processing and storage devices, tanks and tanks for transporting liquid products, All kinds of pressure vessel and pipe general articles, heat sink, cosmetic board, photocopier roller, ship material processed by thin plate.
Chemical composition of 3××× Al-Mn alloy (expressed as the highest percentage unless a range value is listed)
硅Si铁Fe铜Cu锰Mn镁Mg铬Cr锌Zn钛TiOther elementsaluminum
eachA total of
0.60.70.05－0.21.0-1.5--0.1-0.050.1597以上
Mechanical and physical properties of 3××× Al-Mn alloy
Mechanical properties:
Tensile strength σb (MPa) ≥140-200
Conditional yield strength σ0.2 (MPa)≥115
State H24 Hardness: HB35-45
Elongation: 12
Sample size: aluminum coil
Note: Lateral mechanical properties of aluminum coil at room temperature
Factory status of 3××× Al-Mn alloy: O, H12, H14, H16, H18, H19, H25, H111, H113, H211, H32, H34, H36, H38, H131, H151, H241, H261, H341, H361, F, etc


3000 series aluminum coil

Submit
SERVICE TELEPHONE: +86 0531-67801808

The company's excellent sales team, looking forward to your call, your choice is the power of our development, we will attentively serve you; Take quality as the core, price as the advantage, service as the auxiliary.

LIYINGSHUN CONTACT INFORMATION

Phone：+86 13395121079
E-mail：info@cnlyssteel.com
Whatsapp：8613395121079

No. 228 Meicun Street, Xinwu District, Wuxi City, Jiangsu Province