ABOUT US

PRODUCT INTRODUCTION

7000 series aluminum coil

Special specifications can be customized according to customer requirements

产品规格.png

7000 series aluminum coil


Item description:Aluminum coil
Width:600mm-2500mm or customized according to requirements
Thickness:0.2mm-500mm or customized according to requirements
Length:According to the need to customize
Main types:Plate, belt, thin plate, medium plate, thick plate, super thick plate, coil
Brand:"1 series: 1A99, 1A97, 1050, 1050A, 1A50, 1060, 1070, 1350, 1145, 1035, 1100, 1200, 1235, 1A30,2 series: 2A01, 2A02, 2A04, 2A06, 2A11, 2A12, 2A14, 2A16, 2A17, 2A21, 2A25, 2A70, 2A80, 2A90, 2204, 2014, 2214, 2017, 2219, 2024, 21243 series: 3A21, 3003, 3103, 3004, 3005, 31055 series: 5A01, 5A03, 5A05, 5A06, 5B05, 5B06, 5A12, 5A13, 5A30, 5A66, 5005, 5019, 5050, 5251, 5052, 5154, 5454, 5754, 5056, 5456, 5082, 5083, 5182, 5183, In 5086,6 series: 6A12, 6B12, 6A51, 6101, 6005, 6060, 6061, 6063, 6063A, 6181, 6082,7 series: 7003, 7005, 7020, 7022, 7050, 7075, 7475, 7A01, 7A03, 7A04, 7A05, 7A09, 7A10, 7A15, 7A52,8 series: 8A06, 8011, 8090,"
Standard:ATSTM B209, JIS H4000-2006, GB/T3190-2008, GB/T3880-2006, etc
Surface:Bright, polished, hairline, brush, sandblasting, grid, relief, etching, rolling surface finish, no stains, no rough edges, patterns, printing
Properties:Corrosion resistance, heat resistance, high hardness, good ductility
Production process:Hot rolling or cold rolling
Status:O、H12、H14、H16、H18、H112、H113、H19、H111、H22、H24、H26、H211、H32、H36、H38、H131、H151、H241、H261、H341、H361、F、T53、T6、T63、T6351、T651、T73、T7351etc.
Product application:Industry, transportation, building modeling, automobile, medical machinery, etc


7000 series aluminum coil

7000 series aluminum coil



① 7000 aluminum alloy is another kind of commonly used alloy, there are many varieties. It contains zinc and magnesium. The strongest of the more common aluminum alloys is 7075, but it cannot be welded, and its corrosion resistance is quite poor, as it is used in many CNC machining parts. Zinc is the main alloying element in this series, and the addition of a little magnesium alloy allows the material to be treated by heat to achieve very high strength properties. This series of materials are generally added with a small amount of copper, chromium and other alloys, among which the number of 7075 aluminum alloy is particularly high quality, the highest strength, suitable for aircraft frame and high strength accessories.
② 7075 belongs to Al-Zn-Mg-Cu superhard aluminum alloy, which has been used in the aircraft industry since the late 1940s and is still widely used in the aviation industry. It is characterized by good plasticity after solid solution treatment, especially good heat treatment strengthening effect, high strength below 150℃, and especially good low temperature strength; Poor welding performance; Stress corrosion cracking tendency; It shall be used by aluminum coating or other protective treatment. The ability of stress corrosion cracking resistance can be improved by two-stage aging. In the annealed and hard-quenched state, the plasticity is slightly lower than that of 2A12 in the same state, slightly better than that of 7A04, the static fatigue of the sheet. Notch sensitive, stress corrosion performance is better than 7A04.
7XXX aluminum zinc alloy is widely used grades: 7075, 7A04(LC4), 7A09(LC9), 7A52, 7A05, etc.
Chemical composition of 7××× Al-Zn alloy (expressed as the highest percentage unless a range value is listed)
硅Si铁Fe铜Cu锰Mn镁Mg铬Cr锌Zn钛TiOther elementsaluminum
eachA total of
0.40.51.2-2.00.32.1-2.90.18-0.285.1-6.10.20.050.15余量
7×××铝锌合金的机Mechanical and physical properties of 7××× Al-Zn alloy械及物理性能
Mechanical properties:
Tensile strength σb (MPa) ≥572
Conditional yield strength σ0.2 (MPa)≥503
Hardness: HB 150
Elongation: 12
Sample size: aluminum coil
Note: transverse mechanical properties of aluminum coil
Factory state of 7××× Al-Zn alloy: T6, T651, T7451, H112;

7000 series aluminum coil

Submit
SERVICE TELEPHONE: +86 0531-67801808

The company's excellent sales team, looking forward to your call, your choice is the power of our development, we will attentively serve you; Take quality as the core, price as the advantage, service as the auxiliary.

LIYINGSHUN CONTACT INFORMATION

Phone:+86 13395121079
E-mail:info@cnlyssteel.com
Whatsapp:8613395121079

No. 228 Meicun Street, Xinwu District, Wuxi City, Jiangsu Province