ABOUT US

LIYINGSHUN

PRODUCT INTRODUCTION

6000 series aluminum coil

‹

›

‹

  • 6000 series aluminum coil
  • 6000 series aluminum coil
  • 6000 series aluminum coil
  • 6000 series aluminum coil
  • 6000 series aluminum coil
  • 6000 series aluminum coil

›

Special specifications can be customized according to customer requirements

产品规格.png


6000 series aluminum coil


Item description:Aluminum coil
Width:600mm-2500mm or customized according to requirements
Thickness:0.2mm-500mm or customized according to requirements
Length:According to the need to customize
Main types:Plate, belt, thin plate, medium plate, thick plate, super thick plate, coil
Brand:"1 series: 1A99, 1A97, 1050, 1050A, 1A50, 1060, 1070, 1350, 1145, 1035, 1100, 1200, 1235, 1A30,2 series: 2A01, 2A02, 2A04, 2A06, 2A11, 2A12, 2A14, 2A16, 2A17, 2A21, 2A25, 2A70, 2A80, 2A90, 2204, 2014, 2214, 2017, 2219, 2024, 21243 series: 3A21, 3003, 3103, 3004, 3005, 31055 series: 5A01, 5A03, 5A05, 5A06, 5B05, 5B06, 5A12, 5A13, 5A30, 5A66, 5005, 5019, 5050, 5251, 5052, 5154, 5454, 5754, 5056, 5456, 5082, 5083, 5182, 5183, In 5086,6 series: 6A12, 6B12, 6A51, 6101, 6005, 6060, 6061, 6063, 6063A, 6181, 6082,7 series: 7003, 7005, 7020, 7022, 7050, 7075, 7475, 7A01, 7A03, 7A04, 7A05, 7A09, 7A10, 7A15, 7A52,8 series: 8A06, 8011, 8090,"
Standard:ATSTM B209, JIS H4000-2006, GB/T3190-2008, GB/T3880-2006, etc
Surface:Bright, polished, hairline, brush, sandblasting, grid, relief, etching, rolling surface finish, no stains, no rough edges, patterns, printing
Properties:Corrosion resistance, heat resistance, high hardness, good ductility
Production process:Hot rolling or cold rolling
Status:O、H12、H14、H16、H18、H112、H113、H19、H111、H22、H24、H26、H211、H32、H36、H38、H131、H151、H241、H261、H341、H361、F、T53、T6、T63、T6351、T651、T73、T7351etc.
Product application:Industry, transportation, building modeling, automobile, medical machinery, etc


6000 series aluminum coil

6000 series aluminum coil


6××× series aluminum silicon alloy
Standard: GB/T3190-1996
Features and scope of application:
6XXX series is a heat treatable strengthening alloy, with good formability, weldability, machinability and good strength, at the same time, after annealing can still maintain a good operability.
The main alloying elements of 6XXX series alloy are magnesium and silicon AlMgSi1Cu, and form Mg2Si phase. If contain a certain amount of manganese and chromium, can neutralize the bad effect of iron; Sometimes a small amount of copper or zinc is added to improve the strength of the alloy without significantly reducing its corrosion resistance; There is also a small amount of copper in the conductive material to offset the adverse effects of titanium and iron on electrical conductivity; Zirconium or titanium can refine the grain size and control the recrystallization structure. Lead and bismuth can be added to improve machinability. Mg2Si is solidly dissolved in aluminum, which makes the alloy have artificial aging and hardening function.
6061-T651 is the main alloy in the 6XXX series of alloys. It is a high-quality aluminum alloy product produced by heat treatment and pre-stretching process. Although its strength is not compared with that of 2XXX series or 7XXX series, its magnesium and silicon alloys have many characteristics. It has excellent processing performance, excellent welding characteristics and electroplating, good corrosion resistance, high toughness and no deformation after processing, dense material without defects and easy polishing, color film is easy, excellent oxidation effect and other excellent characteristics.
6XXX aluminum silicon alloy is widely used grades: 6082, 6063 (LD31), 6061 (LD30), 6A02, etc.
Chemical composition of 6××× Al-Si alloy (expressed as the highest percentage unless a range value is listed)
硅Si铁Fe铜Cu锰Mn镁Mg铬Cr锌Zn钛TiOther elementsaluminum
eachA total of
0.4-0.80.70.15-0.40.150.80-1.20.04－0.350.250.150.050.15余量

Mechanical and physical properties of 6××× Al-Si alloy
Mechanical properties:
Tensile strength σb (MPa) ≥310
The conditional yield strength σ0.2 (MPa)≥276
State T6 Hardness: HB90-110
Elongation: 11
Sample size: aluminum coil
Note: transverse mechanical properties of aluminum coil
Factory state of 6××× Al-Si alloy: H112, T6, T651, T5, T4, O state;

6000 series aluminum coil

Submit
SERVICE TELEPHONE: +86 0531-67801808

The company's excellent sales team, looking forward to your call, your choice is the power of our development, we will attentively serve you; Take quality as the core, price as the advantage, service as the auxiliary.

LIYINGSHUN CONTACT INFORMATION

Phone：+86 13395121079
E-mail：info@cnlyssteel.com
Whatsapp：8613395121079

No. 228 Meicun Street, Xinwu District, Wuxi City, Jiangsu Province